Review Explorer

I installed this in our master bathroom and we have used it for about a month now. Since my wife often uses flushable wipes, I got this in hopes of eliminating (or at least significantly decreasing) such usage since they can cause plumbing issues (i.e. clogs!). This was super easy to install...took less than 20 minutes. It comes with a cord that when plugged in heats the seat and the water, but you can also use it without plugging it in which is what we've been doing since we don't necessarily c... Read More

I installed this in our master bathroom and we have used it for about a month now. Since my wife often uses flushable wipes, I got this in hopes of eliminating (or at least significantly decreasing) such usage since they can cause plumbing issues (i.e. clogs!). This was super easy to install...took less than 20 minutes. It comes with a cord that when plugged in heats the seat and the water, but you can also use it without plugging it in which is what we've been doing since we don't necessarily care about a heated seat and/or water. It has two directions of spray (a slightly forward direction and a rear [no pun intended!] direction). You simply use the dial/switch on the side to turn on the spray (move it forward for the front area and move it backward for the rear). It also has two flow settings (min, max) for each direction...so you can choose to spray a little or a lot depending on the situation. We absolutely LOVE this product!!! I wasn't sure how much I would actually use it when I got it but I think I use it more than my wife at this point! Lol It's just so easy and convenient to use. It's also self cleaning btw so now worries there, and the lids are self closing so no more accidentally "dropping" the toilet seat! I would definitely encourage people to check this product out. It's high quality and works flawlessly...and it will definitely eliminate or at least save on the use of flushable wipes!!! :) Totally worth it. Thinking about actually getting one for my parents since we love it so much.  Read Less

Working great so far! Got this as an interim replacement as we wait for a Brondell Swash model to go on sale. Had picked up a round version from Genie Bidet a couple years ago and can compare the kits (though perhaps genie bidet has improved since then). Basically, this looks like all the other bidet seats of the same variety. Same lever, same markings, etc. The things that made This stand out from the Genie Bidet round model was the hardware. The mounting bracket, bolts, and adjustable spacers... Read More

Working great so far! Got this as an interim replacement as we wait for a Brondell Swash model to go on sale. Had picked up a round version from Genie Bidet a couple years ago and can compare the kits (though perhaps genie bidet has improved since then). Basically, this looks like all the other bidet seats of the same variety. Same lever, same markings, etc. The things that made This stand out from the Genie Bidet round model was the hardware. The mounting bracket, bolts, and adjustable spacers are basically identical. The inserts for the American Standard seat, however, or a higher-quality rubber, rather than the hard plastic ones provided with the genie bidet seat. The plastic inserts did not allow for a firm attachment and the seat would move if you were sitting on it and it shifted your weight. I ended up having to use the bolts and the plastic threaded nuts for the genie bidet version. The rubber inserts for the American Standard seat have brass threading and once you get the insert in (a bit of a challenge), they fasten up very snugly without the need for the threaded nuts. That said, if you do need the traditional bolt/nut setup, the nuts provided in this kit appear to be a higher quality plastic, also with the brass threading in the interior, less likely to strip the threads as might happen with the fully plastic ones that came with the genie bidet seat. Again, it’s possible that the hardware kits have been upgraded for the other brand since the time of purchase, so take this with a grain of salt. Be advised if you’re new to bidets, this is cold tap water! You will get accustomed to it but a cold booty spray could also be used to help wake you up in the morning! The seat was easy to install and there were no leaks on the first attempt, which is always great to see. Why 4 stars and not five? Having come from one of the fancy electric seats that finally gave up the ghost, the wider spacing on the wands is noticeable during use. For example, while using the rear wash, you effectively have to scoot a little bit over to make sure that the stream is hitting you where you need it to, to flush the seal, so to speak. This is where having a secure seat is key. If you are shifting around to try and get a good spray, you don’t want the seat to be sliding around on the bowl. Thankfully that’s not the case with this seat. That said, the wands on the electric bidet that we had were so closely spaced, that you didn’t have to move around to “center up“, so to speak, on the spray. Additionally, it’s possible that the wands on the electric version also have the nozzles rotated slightly in to avoid the need to shift around. While you can apparently pull off the heads of these nozzles to clean or replace them, it would be great if these wands could be slightly adjustable to angle them in to account for being a bit more widely spaced than other bidet seats. Also, and this appears to have been remedied with the seats by Alpha Bidet, but the front/back symbols and lever directions are a bit counterintuitive. e.g., turning the lever back should be for the rear spray while forward should be for the feminine spray. Not a dealbreaker, but you would think that would have been a natural design decision to make. Lastly, the mounting bracket and mechanism just barely worked to get a good fit on our American Standard Cadet 3 dual flush toilet using the rubber inserts to mount the seat. The seat almost mounted a bit too far back and that was with the mounting bracket installed as far forward as possible. The traditional nut/bolt mounting might have given it some extra play, but I was able to finally get the seat mounted without looking as though it was sitting further back on the bowl than a traditional seat would. Also, keep in mind that most seats like this, mechanical or electric, require room behind the mounting holes to be fully functional, like having the lid and seat stay up. I didn’t notice any specs for these mechanical seats, but I believe Brondell wants at least 1.5” to 2” of space between the mounting holes and the tank for their electric wand-based bidets. Keep that in mind for these seats as well. The seat feels a bit flat and level compared to the Brondell electric seat, which has more of a downward slope from the back to front of the seat. That slope, while taking some getting used to affords a lid that has a similar slope, which I believe gives it a bit more room for the lid and seat to go back. Both the lid and seat on the American Standard seat are more level, which is why the space between the mounting holes on the bowl and the tank will be important to attend to in getting this seat to work appropriately in terms of the lid and seat being put up and staying up. Hopefully that makes sense. Beyond that, I would recommend pulling the flow regulator. I found the pressure to be a bit low and the lever allows you to effectively determine how much pressure you get, so I don’t see the need to have the regulator installed. The extra pressure is also more effective in getting your seal fully flushed. Sorry to get graphic, butt if you have a softer BM, getting it fully flushed out will mean you won’t have any extra grit or sediment that can eek it’s way out after the fact and cause irritation back there. The extra water pressure can help with that. In sum, this appears to be a great replacement for a more expensive bidet that used a similar wand mechanism, although it required electricity to run. After we had purchased our expensive electric seat, I had wondered if anyone had come up with a similar idea that simply operated off of water pressure. Sure enough, someone had taken the idea and ran with it. If you can’t afford the more expensive electric seats, this is a great alternative that far surpasses the separate bidet attachments that dip down into the bowl and are fastened under your traditional seat (tried one of those too). Get one of these seats and you will wonder how and why you ever went without one before! You will get a much better cleaner bottom and you will use a lot less toilet paper as well. Read Less